LIQUI MOLY Cleaning fluid Motorbike Engine Flush, 250ml
Cleaning liquid Liqui Moly Motorbike Engine Flush, 250ml
Liqui Moly Motorbike Engine Flush, 250ml
For 4-stroke motorcycles with wet clutch suitable and compatible with commercially available engine oils.
Cleaning fluid to clean the interior of the engine from disturbing deposits. Dissolves sludge and varnish formers. Oil-soluble and oil-insoluble residues of all kinds are suspended and removed from the oil circuit when the oil is changed. The engine, which has been freed of deposits and dirt, and the fresh oil, which has not been contaminated by contaminated sites, can thus develop their full potential.
Properties:
- Cleaning and care
- Easy to use
- Neutral to common sealing materials
- Provides original engine performance
- Cat tested
- Long engine life
- High efficiency
>Technical data:
colour / appearance = yellow, turbid
form = liquid
base = additive, carrier liquid
viscosity at 40°C = 24.12 mm²/s
flame point = 61 °C
pour point = -45 °C
odour = characteristic
density at 20°C = 0.805 g/cm³
application area:
Cleans and rinses oil circuits on motorcycles with 4-stroke petrol engines. The frequency of use depends on the degree of contamination of the oil circuit and the oil quality used.
Application:
A 250 ml can is sufficient up to 4.5 l oil filling quantity. Add Motorbike Engine Flush to the engine oil at operating temperature before changing the oil. After adding the engine, let it run for approx. 10 min. in idle speed. Then change the oil and filter. Motorbike Engine Flush is compatible with commercially available engine oils. Suitable for motorcycles with wet clutch.
Scope of delivery: 1 piece, 250 ml
Note:
Our information is based on careful research and may be considered reliable, however, it can only advise without obligation.
Technical data
Artikel: | PW-860-511 |
EAN: | 4054783253302 |
Manufacturer: | LIQUI MOLY |
Execution: | Additiv |
Category: | Additive & Zusätze |
Weight: | 0.2610 |
Filling quantity: | 0.25 |
Kennzeichnung gemäß der Verordnung (EG) Nr. 1272/2008 (CLP)
EUH208-Enthält Benzolsulfonsäure, Methyl-, Mono-C20-24-verzweigte Alkylderivate, Calciumsalze. Kann allergische Reaktionen hervorrufen.
EUH210-Sicherheitsdatenblatt auf Anfrage erhältlich.